
Engineering, manufacturing
and finishing, under one roof.
Seventeen years of engineering, machining, fabrication and surface finishing, practised side by side in one Istanbul workshop, so a drawing becomes a finished, coated piece without leaving the building.
Precision manufacturing:
nine capabilities
Surface treatments
& coatings
- Decorative PVD
19 colours · 8 finishes
Full chromatic register on a super-mirror, satin, brushed, hammered, etched or bead-blasted base.
- Plating & patina
Electrochemical & hand
Gold, silver, nickel, palladium and chrome plating; hand patination from Light to Time-Worn.
- Paint
Wet paint & powder coating
Wet paint and electrostatic powder coating in any RAL or NCS reference, durable, even, repeatable.
- Protection
Lustre Series™ · Untouched™
Post-PVD treatments: Bright / Soft / Deep gloss control, plus anti-fingerprint Untouched™. Patent pending.
The full library: 19 PVD colours on super mirror plus custom, across 8 surface finishes. See all on Materials →
Decorative and functional PVD, including DLC and the full TiN to ZrN range, have their own page. See PVD Coating →
Running your own line rather than sending parts out? We design, build and install PVD coating machines, run helium leak detection and give plant consultancy. See PVD coating machines and plant consultancy.
Standards & quality control
Quality control, every batch: coating-thickness measurement; adhesion testing; surface roughness (Ra, Rz) pre/post; visual inspection at 10× under controlled lighting; dimensional check; and colour verification against reference plates.
Every piece leaves with a batch record, test results and full traceability. Documentation travels with the part.
Technical FAQ
Can you work from our drawings and CAD files?
Yes. We work from STEP, IGES, Parasolid, DWG and DXF, or from drawings and physical references. We can also develop the design with you from a concept or a sketch.
Do you handle design and engineering, or only fabrication?
Both. We can take a finished drawing straight to production, or design and engineer the piece with you, including structural detailing and kinetic or moving mechanisms, before anything is cut.
Which substrates do you work with?
Dekap works in stainless steel 304 and 316/316L, brass, bronze, copper, titanium and aluminium, and details glass, stone and wood alongside the metal. The grade is chosen with the architect for each position: 316L for wet, coastal and exterior use, brass and bronze where a warm surface that ages is wanted. For kitchens, bars and spas the grade and coating are specified for food and water contact case by case.
Can you match an existing finish or colour sample?
Yes. We match colours and finishes against a physical sample or reference, and produce a new sample in your substrate for sign-off before production.
Is PVD suitable for kitchens, bathrooms and pools?
PVD-coated 316 stainless steel is widely used in kitchens, bars, bathrooms, pools and spas, because the film is dense, inert and easy to clean. Where a surface needs formal food-contact or drinking-water approval, that is not assumed: tell us the requirement, and food-contact documentation can be arranged for the project on request. Heavily chlorinated pool water calls for 316L and regular rinsing with fresh water.
Do you do powder coating and wet paint with RAL codes?
Dekap applies electrostatic powder coating and wet paint in any RAL or NCS reference, even, durable and repeatable across a batch. Because decorative PVD, electroplating and hand patination are done in the same atelier, the painted, coated and patinated parts of one project come from one place and are approved on plates side by side.
What do you need from us to prepare a quote?
A quote starts from drawings or sketches with dimensions, the quantity, the metal and finish you have in mind, and where the piece will be installed: indoors, outdoors or by the sea. Photos of an existing piece or a reference finish help, as does the programme you are working to. Send us the drawings and we will come back with questions, a proposed approach and a price.
What standards do you test against?
Dekap works under an ISO 9001 quality management system. Painted finishes are checked for adhesion to ASTM D3359 (cross-cut) and hardness to ASTM D3363 (pencil). PVD colour is checked with a measuring instrument on every batch, and each finish is approved on a sample plate in the final substrate before production. Fire, food-contact and RoHS/REACH documentation can be arranged for a project on request.
What are your lead times and batch sizes?
Lead time varies with the project and the size of the parts. Quantity is open: a single bespoke piece or a high-volume series, finished to the same protocols throughout, agreed per order.
Do you deliver, offer installation and provide spec sheets?
Yes. We agree each finish on a plate in the final substrate before production, supply per-colour and per-finish documentation and batch records, and deliver with protective packing and insured logistics. Installation is available too: when requested, we organise it.
How are very large pieces made and delivered?
Very large pieces, such as long handrails, tall cladding runs or feature stairs, are made in sections with planned joints and assembled on site. The joint line is agreed on the drawings, so it reads as a deliberate reveal rather than a repair, and each section is sized to the coating line, transport and site access. Sections travel in protective packing and are fitted in sequence with the installation.